3M Products
01
Trough-Penetration Sealants
3MTM Fire Barrier Sealant CP 25WB+
Our most popular intumescent firestop sealant with
over 600 tested and listed systems
- Up to 4-hour fire ratings per ASTM E 814 (UL 1479)
- Superior adhesion — bonds to concrete, metals,
wood, plastic and cable jacketing - Extensive library of UL Classified fire protection
systems - Intumescent — expands when heated to seal around
items exposed to fire - Low VOC*
Check UL directory. Not approved for use with
CPVC pipes made using Noveon resins.
3M™ Fire Barrier Sealant IC 15WB+
3M™ Fire Barrier Sealant IC 15WB+ is a cost-effective, one-part, gun-grade, latex based, intumescent firestop sealant that dries to form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant IC 15WB+ firestops through penetrations passing through fire-rated floor, floor/ceiling or wall assemblies, as well as other fire-rated interior building partitions and assemblies (e.g. static construction joints or blank openings). In addition, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant IC 15WB+ to expand and help maintain a firestop penetration seal for up to 3 hours as penetrants are exposed to fire. 3M™ Fire Barrier Sealant IC 15WB+ bonds to most construction substrates, including: gypsum wallboard, concrete, metals, wood, plastic and cable jacketing. No mixing is required.
- Firestop tested up to 3 hours in
accordance with ASTM E 814 (UL
1479), ASTM E 1966
(UL 2079) & CAN/ULC-S115 - Expanded fire protection systems
- Helps minimize sound transfer*
- Meets the standards and is deemed
FBC™ System Compatible - Sag-resistant
- Halogen-free
- Excellent adhesion
- Re-enterable/repairable
- Excellent caulk rate
- Paintable
- Water clean up
03
Through-Penetration Watertight Sealants
Non-slumping silicone firestop for wall and floor applications.
3MTM Fire Barrier Water Tight Sealants achieve the benefits of firestopping and a water light seal in one application, and offer the following benefits.
- Meet UL Water Leakage Test, W-rating — Class 1 requirement for systems tested and listed in accordance with ANSI/UL 1479
- Provide excellent adhesion on most construction surfaces, including: Concrete, gypsum, metal, plastic (CPVC compatible), wood and insulation
- Ideal for the following interior construction voids: blank openings, metallic pipes, non-metallic pipes, cables, cable trays, insulated pipes, busways HVAC vents and ducts, combos and bottom of wall construction joints.
- Up to 3-hour fire ratings per ASTM E 814 (UL 1479)
- Up to 3-hour fire ratings per ASTM E 814 (UL 1479)
- Low VOC*
04
3M™ FireDam™ Spray 200
3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. This material is used to firestop perimeter joints (curtain wall), construction joints and through penetration openings. 3M™ FireDam™ Spray 200,when installed prop-erly, will help control the transmission of fire, heat, and smoke before, during, and after exposure to fire.
- Up to 4-hour fire protection in
construction joints per ASTM E 1966
(UL 2079) - Up to 2-hour fire protection for through
penetration systems per ASTM E 814
(UL 1479) & CAN/ULC-S115 - Highly elastic material maintains
performance with up to ± 50%
movement capabilities. - Helps minimize sound transfer*
- Improved spraying pattern –
applied with conventional airless
spray equipment - Robust jobsite formula (freeze/thaw
resistant and uniform seal formation
in hot or cold drying conditions) - Improved spraying for lower sag,
uniform coating build properties
(stays where it’s sprayed) - Improved hiding power to maintain
proper coating thickness - Paintable
- Easy clean up
05
Construction Joint Firestop Solutions
3M™ Fire Barrier Sealant FD 150+
3M™ Fire Barrier Sealant FD 150+ is an economical, ready to use, gun-grade, elastomeric sealant that dries to form a monolithic flexible firestop seal.
- Firestop tested up to 3 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
- Fire Resistive Joint System tested up to 4 hours in accordance with ASTM E1966 (UL 2079)
- ±19% movement capability
- Helps minimize noise sound transfer – STC rating of 56 when tested in STC 56-rated wall assembly
- Re-enterable / repairable
- Sag-resistant formulation
- Excellent adhesion
- Paintable – recommended to test on a sample or in a discrete location to ensure compatibility
- Water clean-up
3M™ Fire Barrier Sealant FD 150+ is an ideal product for sealing construction joints and through penetrations such as metallic pipes, conduits, power and communication cables. 3M™ Fire Barrier Sealant FD 150+ helps control the spread of fire and helps limit the spread of noxious gasses, smoke and water when installed in accordance with a UL or Intertek listed through penetration or fire resistive joint assembly.
06
Through-Penetration Mortal
3MTM Fire Barrier Mortar
Lightweight, gypsum-based and endothermin firestop that is ready for mixing with portable water. Firestop penetration passing through fire-rated floor or wall assemblies.*
- Up to 3-hours fire ratings per ASTM E 814 (UL 1479)
- Variable mix ration permits self-leveling as well as trowelable
application consistencies - UL listed systems (including concrete floors with 2-1/32’’ minimum thickness)
- Excellent adhesion – bonds to concrete, metals, wood, plastic and cable jacketing
- Re-enterable/repairable with common trade tools
- Acts as a heat sink, reducing the likelihood of combustibel matter igniting on the unexposed side of the assembly
- Dry mix available in 5 gallon (28 Ib.) pails and 44 Ib. bags
* Not load bearing.
07
Fireblocks
Versatile fireblocks for residential and other non-rated (Type V) construction. These products also act as a draftstop to help reduce air infiltration.
3MTM Fire Barrier RATED FOAM
Combines the high-speed application properties of foam and the long-lasting protection of caulk
- Ready-to-use — mixing required
- Expands up to 200% in volume to quickly and effectively seal openings
- Heat-resistant up to 240oF
- Tested to ASTM E 84 (modified) as a Type V Residential Fireblock
- Draftstop — helps reduce air infiltration
- Thermal insulator — R-Value of 4-5 per inch typical
- Meets the intent of International Building Code (IBC) and International Residential Code (IRC) Fireblocking
- Excellent adhesion — bonds to concrete, brick, metals wood, plastic and cable jacketing
- Minimal shrinkage and sag-resistance help ensure longecity
- Tack-free in approximately 5 minutes
08
Through-Penetration Specialty Products
3MTM Fire Barrier Composite Sheet CS-195+
Ideal for firestopping blank openings and through-penetrations of multiple cables, pipe ducts bus ducts and cable trays.
- Up to 4-hour fire ratings per ASTM E 814 (UL 1479)
- No mixing or damming required
- Easy to install using common trade tools
- Easy to fasten, bolt punch or drill through (mounts easily with self-tapping screws or anchor bolts)
- Re-enterable
- Bottom-of-floor applications available
- Low VOC
- Available size: 16’’ x 28’’, 36’’ x 24’’, 36’’ x 36’’, 36’’ x 41’’ and 28’’ x 52’’
09
Through-Penetration Specialty Products
3M™ Fire Barrier FS-195+ Intumescent Wrap Strip
3M™ Fire Barrier FS-195+ Intumescent Wrap Strip is one-part, organic/inorganic, fire resistive elastomeric sheet with aluminum foil on one side. Designed to firestop metallic and non-metallic penetrations in fire rated assemblies.
- Intumescent – Expands when exposed to heat sealing voids created by combustible items
- Smoke seal – retards spread of toxic by-products of combustion
- Superior aging properties
- Simple, cost-effective installation
- Low flame spread and smoke development
- Re-enterable. No special tools required
- Low odor
- High quality aluminum foil serves as an installation aid.
10
3M™ Fire Barrier Tuck-In Wrap Strips
3M™ Fire Barrier Tuck-In Wrap Strips are designed to help prevent the passage of fire and smoke in new or existing non-metallic (e.g. plastic) pipe penetrations through wall or floor assemblies. 3M™ Fire Barrier Tuck-In Wrap Strips are engineered primarily for top-side firestop installations and help eliminate the need for retaining collars, concrete screws, ladders or most other material and equipment necessary for bottom-side installations. 3M™ Fire Barrier Tuck-In Wrap Strips come ready to install with an adhesive-backed closure label (excludes WS Roll). The wrap strips can be easily installed in both concrete floor and wall assemblies, as well as gypsum wallboard assemblies.
- Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479)
- Top-side concrete floor installations help eliminate the need for steel retaining collars and most other bottom-side installation equipment and materials.
- Adhesive-backed label for quick
installation. - Ready-to-install wrap strip—precut to
length for 2 in. (51 mm), 3 in. (76 mm) and 4 in. (102 mm) non-metallic pipes - Firestop up to 6 in. (152 mm) PVC pipe (requires 2-layers using 3M™Fire Barrier Tuck-In Wrap Strip WS Roll)
11
3M™ Fire Barrier Plastic Pipe Device (PPD)
3M™ Fire Barrier Plastic Pipe Device is a one-piece metallic collar assembly encasing 3M™ Fire Barrier FS-195+ Intumescent Wrap Strip material. Manufactured with 3M’s firestop technology, 3M™ Fire Barrier Plastic Pipe Device has been designed to firestop non-metallic penetrations in fire rated assemblies, helping prevent the passage of smoke and flames in the event of a fire. 3M™ Fire Barrier Plastic Pipe Device is used for new and retrofit installations and will accommodate nominal 6 inch (168.3 mm actual) schedule 40 waste and vented non-metallic penetrants.
- Intumescent – Expands when exposed to heat sealing voids created by combustible items
- One piece – making installation rapid and simple
- Factory made, assuring consistent build quality
- Smoke seal – retards spread of toxic by-products of combustion.
12
3M™FireBarrier Duct Wrap 615+
3M™ Fire Barrier Duct Wrap 615+ is a flexible fire-resistant wrap consisting of an inorganic fiber blanket encapsulated with a scrim-reinforced foil. The product is 1-1/2 in. thick, 6pcf density1. It is used to fire rate commercial kitchen grease ducts as well as ventilation ducts. 3M™ Fire Barrier Duct Wrap 615+ is a proven alternative to 1- or 2-hour fire-resistant rated shaft enclosures for grease ducts (ICC-ES ESR-1255). With its excellent insulating capabilities, low weight and thin profile, it is an ideal choice for a duct enclosure system. This non asbestos2 wrap installs easily due to its high flexibility and strength.
- Two-layer wrap for grease ducts rated as a shaft alternative per ASTM E2336
- Zero clearance to combustibles throughout the entire enclosure system for congested spaces
- Butted inner layer in 2-layer Grease Duct Applications
- One-layer wrap for fire-resistive ventilation ducts per ISO 6944 Type A
- High flexibility for installation ease
- Foil encapsulated for blanket protection, less dust, and high wrap strength
- Widest range of penetration seal systems
- Available in 24 in. x 25 ft. (609.6 mm x 7.62 m) and 48 in. x 25 ft. (1219.2 mm x 7.62 m) rolls
- Blanket adhered to foil scrim
